In the EU, the first energy audits under the recast Energy Efficiency Directive were due on 11 October 2026. For the largest consumers, a certified energy management system (EnMS) comes next. Both obligations now target final energy consumption, not company size. The UK left the EU and did not transpose this directive: its own scheme, ESOS, still works by size.
In the EU, the EnMS is required by 11 October 2027, eleven months from now. Is your company caught through its EU subsidiaries? What does ESOS ask of the UK side, and on what data?
Directive (EU) 2023/1791 on energy efficiency and its Article 11
An energy efficiency directive published in the Official Journal in September 2023
Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency recasts Directive 2012/27/EU[1][1]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency”, published in the Official Journal of the EU on 20/09/2023See in sources ↓. Adopted by the European Parliament and the Council, it was published in the Official Journal of the European Union on 20 September 2023. It entered into force on 10 October 2023[1][1]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency”, published in the Official Journal of the EU on 20/09/2023See in sources ↓. Member states then had to transpose it into national law. The UK, which had left the EU, did not.
This recast EED stems from the European Commission's Fit for 55 package. It aims to cut greenhouse gas emissions and reach climate neutrality by 2050[1][1]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency”, published in the Official Journal of the EU on 20/09/2023See in sources ↓. Its Article 11 reaches down to individual companies. Depending on their consumption data, it requires an audit or an EnMS within the meaning of the ISO 50001 standard.
The targets: 11.7% less final energy consumption by 2030
The collective reduction target sits in Article 4 of the directive. It requires energy consumption at least 11.7% lower in 2030 than the 2020 reference projections[1][1]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency”, published in the Official Journal of the EU on 20/09/2023See in sources ↓. To get there, each member state must generate final energy savings that rise in steps.
The trajectory is as follows: 0.8% a year in 2021-2023, 1.3% in 2024-2025, 1.5% in 2026-2027, then 1.9% a year from 2028 to 2030[1][1]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency”, published in the Official Journal of the EU on 20/09/2023See in sources ↓. These rates bind member states, not individual companies. Article 11 translates their effort into audits and EnMSs on the company side.
Energy audit every four years or certified energy management system
Article 11 sets two tiers. Above the first, the enterprise carries out an energy audit every four years. Above the second, it implements an energy management system certified by an accredited body[2][2]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791”, Article 11 (energy management systems and energy audits)See in sources ↓.
The change concerns scope: the criterion is energy consumption, no longer company size. The thresholds are 10 TJ (about 2.78 GWh) and 85 TJ (about 23.6 GWh) of average annual energy consumption[2][2]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791”, Article 11 (energy management systems and energy audits)See in sources ↓. A very energy-intensive SME therefore falls within scope. This is precisely where the UK differs: ESOS still targets large undertakings by headcount, turnover and balance sheet.
What exemptions does the directive provide?
The directive spares enterprises that implement a certified EnMS from the audit, and leaves the details to each member state. In the UK, ESOS offers a comparable route: a certified ISO 50001 EnMS replaces the assessment when it covers total energy consumption or significant energy consumption, i.e. at least 95%[3][3]RegulationGOV.UK, “How to comply with the Energy Savings Opportunity Scheme (ESOS) Phase 4”, guidance published 30 July 2026: qualification, 95% coverage, ISO 50001 route, deadlinesSee in sources ↓. The certificate must have been issued on or after 6 December 2023, be valid on 5 December 2027 and come from a body accredited by UKAS, by an EU member state accreditor or by an IAF member[3][3]RegulationGOV.UK, “How to comply with the Energy Savings Opportunity Scheme (ESOS) Phase 4”, guidance published 30 July 2026: qualification, 95% coverage, ISO 50001 route, deadlinesSee in sources ↓. An energy performance contract (EnPC), on the other hand, is not one of the ESOS compliance routes.
Transposition, Brexit and calendar: from September 2023 to December 2027
ESOS Regulations, Phase 4 guidance and SI 2026/701: what applies to UK companies
The UK left the EU and did not transpose the recast directive. Its own scheme, the Energy Savings Opportunity Scheme (ESOS), derives from Article 8 of the 2012 directive and is set out in the ESOS Regulations 2014 (SI 2014/1643), as amended[4][4]Regulationlegislation.gov.uk, “The Energy Savings Opportunity Scheme Regulations 2014” (SI 2014/1643), as amendedSee in sources ↓. The government's 2025 post-implementation review describes it as “the UK equivalent of the EU's Energy Efficiency Directive (EED)” and recommends keeping it.
Two more recent texts set how it applies today. The Phase 4 guidance, published on 30 July 2026, keeps the size criterion: 250 or more employees, or turnover above £44m and a balance sheet above £38m[3][3]RegulationGOV.UK, “How to comply with the Energy Savings Opportunity Scheme (ESOS) Phase 4”, guidance published 30 July 2026: qualification, 95% coverage, ISO 50001 route, deadlinesSee in sources ↓. The Amendment Regulations 2026 (SI 2026/701), in force since 22 July 2026, strengthen reporting on action plans without changing any qualification threshold[5][5]Regulationlegislation.gov.uk, “The Energy Savings Opportunity Scheme (Amendment) Regulations 2026” (SI 2026/701), in force 22 July 2026See in sources ↓. Groups comply as a whole: the UK undertaking and its corporate group[3][3]RegulationGOV.UK, “How to comply with the Energy Savings Opportunity Scheme (ESOS) Phase 4”, guidance published 30 July 2026: qualification, 95% coverage, ISO 50001 route, deadlinesSee in sources ↓. Their subsidiaries in EU member states, however, fall under each country's transposition of Article 11.
Penalties: set by each member state, up to £50,000 under ESOS
In the UK, Part 8 of the ESOS Regulations provides a civil penalty of up to £50,000 for failing to carry out an assessment, plus £500 per working day for up to 80 working days. The regulator can also publish the penalty. Within the EU, the directive does not set the fines itself: each member state lays down the penalties attached to Article 11[2][2]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791”, Article 11 (energy management systems and energy audits)See in sources ↓. For a listed company, publicity can weigh more than the fine itself.
From adoption to ESOS Phase 4: key dates from 2023 to 2027
Twelve milestones separate the adoption of the text by the European Parliament, in September 2023, from the ESOS Phase 4 deadline in December 2027. Transposition of the directive was due by 11 October 2025[1][1]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency”, published in the Official Journal of the EU on 20/09/2023See in sources ↓. The timeline combines EU milestones and UK ESOS milestones, and separates what already applies from what is still to come. Check which side of the marker your next deadline falls on.
Only two milestones lie ahead. The first concerns EU subsidiaries above 85 TJ, which need a certified EnMS; the second, ESOS Phase 4, concerns every UK group that qualifies on 31 December 2026.
EU audits due, ESOS Phase 4 approaching: where does your company stand?
The November 2026 marker shows it: in the EU, the first energy audits were due by 11 October 2026[2][2]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791”, Article 11 (energy management systems and energy audits)See in sources ↓. In the UK, the Phase 4 assessment must be overseen by an ESOS Lead Assessor listed on an approved register[6][6]RegulationGOV.UK, “Energy Savings Opportunity Scheme (ESOS)”, guidance updated 2 September 2026: approved ESOS Lead Assessor registersSee in sources ↓, unless a certified ISO 50001 EnMS covers your energy consumption. For EU subsidiaries above 85 TJ, the next step is a certified EnMS by 11 October 2027[2][2]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791”, Article 11 (energy management systems and energy audits)See in sources ↓.
ESOS qualification is reassessed on each phase's qualification date: 31 December 2026 for Phase 4[4][4]Regulationlegislation.gov.uk, “The Energy Savings Opportunity Scheme Regulations 2014” (SI 2014/1643), as amendedSee in sources ↓. Then comes a question few boards ask: do your consumption figures rest on reliable meters? Any energy management system built on those figures inherits their flaws.
Comparable data and proven savings: what Article 11 and ESOS assume
The six data flaws that undermine an audit before it starts
An annual average calculated on a meter that drops out is not an average. The classic case: two sub-meters silent since a controller was replaced, discovered during the energy audit. Here are the six data flaws we look for first when we make meters reliable. Tick the ones you recognise: each box shows what it distorts.
Each ticked box distorts a specific regulatory deliverable. A gap lowers average annual consumption and can suggest that a threshold has not been crossed. Double counting produces the opposite error. Undetected drift builds the action plan on phantom consumption.
Before any commitment, keep the three questions to ask the assessor before signing: where do the kWh come from? Who guarantees consistency between the main meter and sub-metering? What weather correction is applied?
Public sector, data centres and related schemes: what the directive adds
Public bodies: 1.9% less a year and 3% of buildings renovated
Public bodies in EU member states reduce their final energy consumption by 1.9% a year compared with 2021[7][7]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791”, Article 5 (public bodies) and official EUR-Lex summarySee in sources ↓. This obligation targets public bodies, not the enterprises covered by Article 11.
Energy renovation covers 3% a year to NZEB level, that of a nearly zero-energy building, measured against the total floor area of public buildings[1][1]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency”, published in the Official Journal of the EU on 20/09/2023See in sources ↓. The public sector also builds high energy performance into its procurement, with energy performance contracting as a possible lever[1][1]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency”, published in the Official Journal of the EU on 20/09/2023See in sources ↓.
Data that counts several times over, from one scheme to another
Meter readings and BMS trend logs feed the ESOS assessment, SECR energy and carbon reporting in the directors' report, the energy review of an ISO 50001 EnMS and the continuous monitoring that Approved Document L requires of BACS in new buildings above 180 kW. One set of meters for four uses: it deserves to be made reliable once and for all, not corrected four times by four contractors.
What Foobot brings: reliable energy data before you report it
BMS advisory: reliable meters before the audit and annual reporting
Our Meter reliability assignment, one of the deliverables of our BMS advisory, also stands on its own. Our teams diagnose the metering chain, bring the main meter and sub-metering back into line, then deliver a usable history for the consumption baseline. The six flaws in the checklist are the starting point. The energy audit then starts from a defensible base.
AI Control: lower HVAC consumption without works, with savings measured under IPMVP
When a building remains complex to control, our AI Control takes over. A digital twin of the site, trained on its BMS history, controls the hot water and chilled water loops every 15 minutes, 24/7. It integrates with the existing BMS without works, over BACnet or LonWorks (often shortened to LON). The contract rests on a 12-month commitment and on savings measured under the IPMVP protocol.
The Foobot EMS to track the consumption you report
To prepare annual reporting, we offer a free EMS (energy management system), an energy tracking tool. Its role: consolidating consumption across several sites, so that the energy consumption you report comes from a single source from day one.
Before December 2027, start with the meters
The Energy Efficiency Directive sets the same thresholds in every member state, and ESOS sets its own criteria in the UK. Both only hold up on comparable, verifiable data: a correct baseline, a stable scope, a written weather correction. Without them, qualification, the action plan and the progress reported on it are built on sand.
This foundation serves beyond Article 11. The EU's EPBD directive on the energy performance of buildings and the BACS requirement of Approved Document L draw on the same meters. To consolidate consumption across several sites, the free Foobot EMS is available online. If your meters have to hold up until your ESOS assessment or the certification audit of your EnMS, let's talk before December 2027.
FAQ - Energy Efficiency Directive
Private companies: who does the Energy Efficiency Directive cover, and what applies in the UK?
In the UK, ESOS applies, not the directive: undertakings with 250 or more employees, or turnover above £44m and a balance sheet above £38m, assessed at group level[3][3]RegulationGOV.UK, “How to comply with the Energy Savings Opportunity Scheme (ESOS) Phase 4”, guidance published 30 July 2026: qualification, 95% coverage, ISO 50001 route, deadlinesSee in sources ↓. In the EU, Article 11 requires an energy audit every four years above 10 TJ (about 2.78 GWh) of average annual final energy consumption, and a certified EnMS above 85 TJ (about 23.6 GWh)[2][2]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791”, Article 11 (energy management systems and energy audits)See in sources ↓.
What are the obligations of the Energy Efficiency Directive?
Enterprises carry out an audit or implement a certified EnMS, then draw up an action plan from the audit's recommendations[2][2]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791”, Article 11 (energy management systems and energy audits)See in sources ↓. Public bodies cut their consumption by 1.9% a year[7][7]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791”, Article 5 (public bodies) and official EUR-Lex summarySee in sources ↓. Data centres from 1 MW make use of their waste heat[1][1]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency”, published in the Official Journal of the EU on 20/09/2023See in sources ↓.
Does the Energy Efficiency Directive apply in the UK?
No. The UK left the EU and did not transpose the recast: its ESOS scheme derives from Article 8 of the 2012 directive and is set out in SI 2014/1643, as amended[4][4]Regulationlegislation.gov.uk, “The Energy Savings Opportunity Scheme Regulations 2014” (SI 2014/1643), as amendedSee in sources ↓. ESOS Phase 4 keeps size-based criteria, with a qualification date of 31 December 2026 and notification by 5 December 2027[3][3]RegulationGOV.UK, “How to comply with the Energy Savings Opportunity Scheme (ESOS) Phase 4”, guidance published 30 July 2026: qualification, 95% coverage, ISO 50001 route, deadlinesSee in sources ↓. UK groups with EU subsidiaries remain caught, for those subsidiaries, by each member state's transposition.
What are the objectives of the Energy Efficiency Directive?
The recast Energy Efficiency Directive targets 11.7% lower energy consumption in 2030 than the 2020 projections[1][1]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency”, published in the Official Journal of the EU on 20/09/2023See in sources ↓. Each member state also follows a trajectory of annual savings that reaches 1.9% a year over 2028-2030[1][1]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency”, published in the Official Journal of the EU on 20/09/2023See in sources ↓.
What impact does the directive have on public buildings?
The public sector in EU member states renovates 3% of the floor area of its public buildings each year to NZEB energy performance level[1][1]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency”, published in the Official Journal of the EU on 20/09/2023See in sources ↓. Its procurement favours high energy performance. Energy renovation becomes an annual obligation, no longer an opportunistic decision.
What are the key dates of the Energy Efficiency Directive?
Adopted on 13 September 2023, the directive entered into force on 10 October 2023 and had to be transposed by 11 October 2025[1][1]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency”, published in the Official Journal of the EU on 20/09/2023See in sources ↓. Article 11 set the first audits for 11 October 2026 and the certified EnMS for 11 October 2027[2][2]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791”, Article 11 (energy management systems and energy audits)See in sources ↓. In the UK, the ESOS Phase 4 deadline is 5 December 2027.
How can a building's energy efficiency be improved to meet the directive or ESOS?
Start by making the meters reliable: without a correct baseline, no action plan holds. Then tune the HVAC sequences, including hot water production. Finally, measure the efficiency improvement under the IPMVP protocol, with weather correction.
What is at stake with the Energy Efficiency Directive?
European efficiency policy aims to cut greenhouse gas emissions and reach climate neutrality by 2050[1][1]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency”, published in the Official Journal of the EU on 20/09/2023See in sources ↓. For companies, the stakes lie in Article 11: an audit above 10 TJ, a certified EnMS above 85 TJ[2][2]RegulationEuropean Parliament and Council of the European Union, “Directive (EU) 2023/1791”, Article 11 (energy management systems and energy audits)See in sources ↓. In the UK, ESOS applies instead, with civil penalties of up to £50,000 plus £500 per working day.
Sources and references
7 sources.- [1]European Parliament and Council of the European Union, “Directive (EU) 2023/1791 of 13 September 2023 on energy efficiency”, published in the Official Journal of the EU on 20/09/202309/2023↑ 1 2 3 4 5 6 7 8 9 10 11 12 13 14
- [2]European Parliament and Council of the European Union, “Directive (EU) 2023/1791”, Article 11 (energy management systems and energy audits)↑ 1 2 3 4 5 6 7 8 9
- [3]GOV.UK, “How to comply with the Energy Savings Opportunity Scheme (ESOS) Phase 4”, guidance published 30 July 2026: qualification, 95% coverage, ISO 50001 route, deadlines07/2026↑ 1 2 3 4 5 6
- [4]legislation.gov.uk, “The Energy Savings Opportunity Scheme Regulations 2014” (SI 2014/1643), as amended2014↑ 1 2 3
Show the other 3: [5] to [7]
- [5]legislation.gov.uk, “The Energy Savings Opportunity Scheme (Amendment) Regulations 2026” (SI 2026/701), in force 22 July 202607/2026↑
- [6]GOV.UK, “Energy Savings Opportunity Scheme (ESOS)”, guidance updated 2 September 2026: approved ESOS Lead Assessor registers09/2026↑
- [7]European Parliament and Council of the European Union, “Directive (EU) 2023/1791”, Article 5 (public bodies) and official EUR-Lex summary09/2023↑ 1 2
